Rig Fabrication, Repair and Decommissioning
| AKD Engineering | ||
AKD Engineering offers an offshore engineering and manufacturing service. |
AKD can provide a full suite of offshore services, including offshore personnel, for installations worldwide. |
AKD prides itself on its high-integrity welding capabilities. |
AKD is at the forefront of welding technology with an extensive library of welding procedures supported by a team of highly qualified welders. |
AKD Engineering offers offshore installation commissioning, upgrades, refurbishment, repair and decommissioning. |
|
| Armada Maritime | ||
Maritime salvage and wreck removal are key operational areas for Armada. |
Armada provides salvage response for any vessel, on any sea, at any time. |
Armada can undertake and role in salvage and shipwreck removal projects. |
| Bakrie Construction | ||
Bakrie Construction provides fabrication for steel and modular construction, as well as a range of offshore equipment supply. |
Bakrie Construction follows ISO 9001:2000 quality, ISO 14001:2004 environmental, and OHSAS 18001:2007 occupational health and safety assessment management systems. |
Bakrie Construction completes projects on time with zero lost time and injury (LTI). |
Bakrie Construction has been involved in several worldwide projects. |
Bakrie Construction’s 17.4ha fabrication facility is equipped with 2,500t skidway and jetty for direct receipt of materials. |
|
| Cofely Oil & Gas | ||
Cofely Oil & Gas has built an international reputation for the execution of modifications and maintenance on onshore and offshore installations. |
Offshore access system. The walkway to work. |
Major projects include hook-up of new offshore structures, compression units and installation of complete plants for the oil and gas industry. |
Characteristic of the Cofely Oil & Gas approach is our commitment to achieving the highest standards of quality with every project undertaken, throughout the entire process. |
||
| Densit | ||
The Ducorit® Reinforcement Method’s basic principle involves injection of an ultra high strength material into tubular members or joints or into annuli between piles and sleeves. Depending on the application, the material may be reinforced with steel fibres. |
The strength characteristics exhibited by Ducorit® exceed those of conventional materials by a factor of 5 to10. |
Grouting is usually carried out from a workstation on the platform where mixing and pumping grout takes place. |
Densit® reinforcement technology is currently used in a number of applications including offshore grouting, wear linings, security barriers, industrial flooring and concrete repairs. |
||
| Harland and Wolff | ||
Harland and Wolff designs, constructs, repairs, upgrades, integrates and decommissions offshore structures, including units, modules and jackets. |
Harland and Wolff's docks have a wide variety of cranes for module construction and repair. |
Semi-submersibles, jack-ups, deep-sea barges and support vessels (e.g. shuttle tankers) are all catered for at Harland and Wolff's docks. |
Harland and Wolff's facilities include a module refitting dock, a module repair quay, and an outfitting / commissioning quay. |
Harland and Wolff's one-stop-shop services include module new-build, refit, upgrade, conversion or fabrication. |
|
| Heerema Group | ||
The Heerema Group is a market leader in the offshore industry focused on the design, transportation, installation, and removal of offshore facilities. |
HFG specialises in fabricating large complex constructions mainly for the oil and gas offshore industry. |
HMC transports, installs and removes all types of offshore facilities, including fixed structures, complex infrastructures and floating facilities. |
| LBT Enterprises | ||
LBT Enterprises offers the Prime® pile cutter, a powerful, efficient and safe technology. |
On a recent jacket removal in the North Sea, the Prime® pipe cutter was the tool of choice, performing 40% of the successful structural cuts, out of three cutting technologies. |
Count on the Prime® pipe cutter to finish your project on-time and on-budget. |
Faster cutting time equals reduced vessel time and a lower carbon footprint. |
LBT Enterprises is your one-stop-shop for subsea cutting and dredging technology; featured in photo are the Toyo pumps. |
|
| Lionweld Kennedy Flooring | ||
Safelock flooring has been designed to suit extreme conditions experienced in applications such as the offshore industry. |
Lionweld Kennedy offshore safety grating is comprised of a series of parallel rectangular load bearing bars stood on edge with square twisted cross bars and an additional round bar to prevent a 15mm diameter ball passing through the grating. |
Safegrid has become the industry standard for many applications such as petrochemical plants, heavy duty offshore applications and water treatment plants and is available with either a plain or serrated finish. |
Safegrate flooring is a grating system that can be selected specifically to endure heavy vehicle loads. |
Safetread is one of the most original styles of flooring which has been used throughout the world due to its extremely strong design; itis a popular design for offshore applications. |
|
| Maxit | ||
maxit has, during the last 15 years, laid over 1,000 000m² of marine floors for new building and refurbishments of ships and offshore platforms. |
The maxit Marine A-60 floor system is DNV A-60 approved and recommended for ships and oil platforms requiring fire-insulating constructions. |
Flexible, durable pumped screed systems for steel-decking. |
Deitermann's products for wet construction are designed to protect the parts of any construction from water or to overcome problems caused by moisture. |
||
| Self Leveling Machines | ||
FPSO machining reaching down 9.5m using an XL-CSLM. |
Turret machining using a CSLM. |
Floating crane base machining with an XL-CSLM. |
Machining a hook rail on a floating crane using an XL-CSLM. |
Machining an offshore crane with the crane body jacked using an LP-CSLM. |
|
| Wilhelmsen Marine Engineering | ||
We supply heating, ventilation and air conditioning for offshore sites. |
Our experience in marine engineering projects includes the Sevan Hummingbird floating production, storage and offloading (FPSO) vessel, which is operated by Venture Production. |
We count Jurong Shipyard as one of our clients and worked with the West Sirius ultra-deepwater drilling rig project, which is operated by Seadrill. |
Wilhelmsen Marine Engineering has broad experience in heating, ventilation and air conditioning for offshore facilities. |
The worldwide Wilhelmsen Maritime Services network, including partly and wholly-owned subsidiaries, has 23,000 employees to deliver products and services in more than 2200 ports in 116 countries. |
|
