Pumps and Compressors

Airpac Bukom Oilfield Services
Offshore Zone II air compressors used for repair and maintenance and well test activities.	Ingersoll Rand rigsafe air compressors (1,050scfm / 125psig).	Pipeline dewatering spread, offshore Egypt.
Cochran 4.5Mbtu steam generator with methane, propane and H2S (CO2 option) gas detection.	Dual pot sand filter utilised on a well test, offshore Mozambique.

Airpack
The compressors on the package will be driven via a coupling, gearbox or V-belt by an electric motor, diesel engine or turbine.	Each dryer will be designed according to its required dew point, operating capacity, pressure and temperature.	Airpack has a complete program of nitrogen generators.
Air compressor and dryer package.	Instrument air system package.

Anglia Mechanical
Anglia Mechanical specialises in servicing the demanding needs of the petrochemical industry.	The company has successfully completed projects for both onshore and offshore applications, in both the structural and piping disciplines.	Anglia Mechanical's workshops offer fabrication facilities for all types of construction from general sheet-metal work to heavy plate and pipe.
A comprehensive suite of welding procedures are in place covering the following materials: copper, aluminium, stainless steel, mild steel, alloy steels and duplex.

Axflow
Twelve Blackmer rotary sliding-vane pump-sets complete with geared motor drives and fabricated baseplates, built to order and delivered on-time.	Chemical injection system including a Pulsafeeder hydraulically actuated diaphragm metering pump.	AxFlow pump training – helping users learn how to optimise pump performance and plan preventative maintenance.
Waukesha rotary circumferential piston pump for viscose and abrasive liquids.	A Wilden air-operated double-diaphragm pump from the advanced bolted series.

Bjorge Eureka
The well known EUREKA CD deep well vertical turbine centrifugal pump.	Eureka CD line shaft sea water lift pump driven by a dry electric top mounted motor.	Eureka cargo offloading pumps installed on FPSO.
Eureka BB2 API 610 centrifugal pump in vertical side-side execution.	Eureka 3MW diesel genset to the Skarv-Idun firewater pump package.

Buchan Technical Services
Buchan Technical Services provides offshore equipment rental and contract personnel to oil and gas service companies.	Buchan's equipment rental fleet consists of Zone 1, Zone 2 and safe area, triplex and centrifugal pump options.	Our pipeline commissioning and testing and fluid pumping personnel receive in-house training, and continuous competency assessments.
In our quality paint and finishing shops, every product, from the smallest winch to complex Zone 1 systems, is manufactured or refurbished to the highest standards.

Coates
High pressure booster and primary compressor spread - aero engine testing.	Coates' offshore international support base, Aberdeen.	We are equipped to supply nitrogen generation for underbalanced drilling applications.
Coates specialises in pneumatic drill cuttings removal for offshore drilling operations.	Our steam generators can supply steam to heat exchangers for offshore well testing.

Danco Pump & Supply
	Gaso 3364, also known as 55T-3, a complete pump rebuild, including skid.	Wheatley P-323 complete pump.
Large inventory access, due to on-site machine and mechanic shops, with custom machining available.	Pump parts and custom machined parts can be supplied.

Delta-p
Delta-p provides a range of pumps and pumps skids for various applications, including crude oil and HC cargo.	Delta-p’s highly qualified engineers have years of experience in the offshore industry and provide engineered pump-packages specific to customer needs.	Delta-p’s pumps are suitable for use in challenging environments and have received ISO 9001:2000 accreditation.
Delta-p’s worldwide pump distributor network means that pump repairs and maintenance are widely available.	Delta-p offers high-quality pumps and pump products with reliable delivery and reasonable prices.

Fornovo Gas
Founded in 1969, FG is a specialist in NGV refuelling stations, and CNG transportation and distribution services.	Following success in the Italian CNG market, FG developed its own CNG station technology, Gasvector®.	FG offers a CNG compressor with double-acting cylinders and 400kW to 1,500rpm frame ratings.
FG’s SA200 CNG compressor has single-acting cylinders and 55kW to 1,500rpm frame ratings.	FG’s quality system has been DNV-certified according to ISO 9001:2000 since 2002.

Geveke Pompen
Pump package for injection of corrosion inhibitor.	Chemical injection package with multi compartment chemical storage tank.	Nitrogen generation packages are used in case of large capacities or remote locations.
A chemical transfer package.	A IRCD distibution rack.

Hayward Tyler
The recent submersible motor for Ekofisk is assembled.	Engineered rotor for a seawater lift pump and submersible motor.	A submersible motor driven seawater lift pump (SWL) on the Hayward Tyler test bed. A recent project with Sulzer.
2,500kW, 9kV engineered variable speed deepwater subsea motor in super duplex stainless steel rated at 240bar. Driving a multiphase pump.

HI Fraser
HI Fraser has been offering a diverse product and service range, including high-pressure hazardous gas systems, to customers throughout the Asia Pacific region since 1955.	HI Fraser specialises in the design, manufacture, supply, documentation, installation and maintenance of critical fluid and waste systems, as well as well-head systems and chemical inspection skids.	HI Fraser supports its customers with extensive stocks of standard well-head system and chemical injection skid equipment and spares, as well as providing lifecycle support through our repair facilities based in Australia.
HI Fraser offers solenoid-operated directional control valves and tube fittings from its Sydney and Perth warehouses.

Hughes Pumps
Hughes is proud of its high and ultra high pressure (UHP) positive displacement plunger pumps and water jetting equipment for heavy duty cleaning and cutting.	Jet assisted pile driving at 350bar utilising Hughes’ water jetting equipment.	This subsea hydrostatic test and chemical injection unit uses one of Hughes’ high pressure positive displacement plunger and piston process pumps.
Capable of pumping most aggressive and non-aggressive liquids, Hughes offers dualway metering pumps with robust design with cast iron frames.	Hughes offers CP equipment and components for in-place cleaning systems including hydraulic jet cleaners, fixed or rotating tank and vessel cleaners, and lances.

LEWA
Single skid package carrying four G3G triplex units for high pressure methanol injection, offshore - West Africa.	The world largest quadruplex process diaphragm pump G4T for CO2 re-injection in the Norwegian sector of the North Sea. Pump injects 125m³/h at 250bar max.	Offshore chemical injection package with multi-compartment tank, diaphragm metering pumps and explosion-proof controls.
Falcon intermitted high pressure methanol injection, view of tanks and process diaphragm pumps during construction on the FPSO.	Demonstration of LEWA's modular design: one motor can drive up to nine pumps operating at different speeds, a unique selection of plunger diameters and manual, pneumatic or electronic stroke adjustments.

MAN Turbo
Process-gas screw compressor.	Centrifugal compressor.	Two centrifugal compressors for an installation for exporting gas on a North Sea platform.
As an international company, MAN Turbo has its headquarters in Oberhausen, Germany and links to around 150 representatives worldwide.

PG Pump Solutions
PG-MAPS: multi-application pump solution, subsea pump module.	Gjoa chemical injection module (the world’s largest).	PG-MACS, multi-application cargo solution; the cargo handling system in closed tanks and piping from rig to supply vessel.

Pneumatic Partners
Pneupa Nitrogen Systems supplies tailor made, cost effective and cost efficient nitrogen and compressed air technology systems.	The Nitrogen container-system, the most powerful of the Pneupa models, is installed in a 40ft container, which can be moved by crane at any time to operate at any location.	The Nitrogen container-system can simultaneously supply several containers / rooms with nitrogen, thanks to a combined output of 1,000m³/h and a degree of nitrogen purity of 95%
Advantages of Pneupa nitrogen and compressed air technology systems include flexible adaptation of the degree of nitrogen purity, up to 99.5%, and planning security through design that is accurate in every detail.	Even after delivery of your nitrogen or compressed air system, Pneupa Nitrogen Systems is available with an extensive array of servicing offers - round the clock and worldwide.

PROCINT
Continuous duty hot oil circulation pump2 × 40,000bpd at 140barg, Shell Espirito Santo FPSO.	Flow line service pump package: 134.25m³/hr (at 94% VE) at 250barg at 280rpm, FPSO Pioneer Petrobras.	Continuous duty injection package electric-driven S&K 250t pump.
PROCINT provides CPC Pumps’ centrifugal API 610 pumps, which suit a wide range of offshore oil and gas applications, including crude oil transfer.	CPC’s pumps are compliant with the ASME boiler and pressure vessel code, section III, division I, class 3.

ProMinent
In the oil and gas industry, total operational reliability takes top priority; our customers can depend on ProMinent metering pumps.	The hydraulic diaphragm metering pump Mh offers a performance range 0l/h - 800l/h per pump head and a maximum pressure of 4,000bar.	The TriPower MF process diaphragm pump complies with the technical guidelines of the American Petrol Institute API 674.
The selection guide for process metering pumps supports you in pre-selecting the right pump type for your application.	Special applications need special dosing systems - for the oil and gas industry, we offer special packages that are tailor-made for our customers.

Resource Equipment Rentals
Resource Equipment Rentals (RER) supplies complete pumping and dewatering solutions, and associated rental equipment to the offshore industry.	In addition to our extensive range of pumps, RER offers compressors, dryers, receivers, coolers and filters, and a wide choice of late-model silenced generators.	RER delivers innovative dewatering and pumping solutions to ensure your project meets all required targets in terms of safety, quality, efficiency, and on-time.
More than just a rental company, RER’s solutions include site inspections, design, engineering, custom-built equipment, onsite installation, and maintenance.	Since its founding in 2004, RER has gone from strength to strength, successfully completing projects for a number of high-profile clients.

SAFE
SAFE is a world-leading manufacturer of equipment for natural gas compression with up to 500kW installed power; our fleet consists of over 3,000 compressors installed since 1975.	Gas-engine drive options are available for both SAFE and GE HSR compressors.	SAFE has entered an agreement with GE Oil & Gas for the packaging and worldwide sale of their HSR compressors, including DS, ES and FS premium frames.
Compression unit for underground storage equipped with a GE HSR, six-cylinder FS606 model compressor, driven by a 16V AT27GL Waukesha gas engine.	SAFE has recently delivered a fuel-gas booster package to ENI Congo, equipped with a GE HSR, two-cylinder DS602 model compressor, driven by an electric motor.

SAG Alutech
SAG Alutech provides EN 286-2 and EN 286-4-compliant high-performance offshore aluminium air-pressure tanks.	SAG Alutech offers hydraulic tanks as single or combi-tank solutions with up to three chambers based on individual specifications.	SAG Alutech has built a reputation for its capability to provide special welded constructions such as platforms.
We provide aluminium structures for the offshore industry such as stairs, which are built using state-of-the-art CAD software and data interchange.	Alutech offers special aluminium constructions using SAG Motion technology as a central source of innovative in-house and special developments.

Torqueflow-Sydex
Torqueflow-Sydex’s ‘E’ range vertical progressing cavity pumps have a capacity of 200l/h up to 150m³/h, and up to 12barg (174psig) of pressure.	The ‘K’ range horizontally mounted progressing cavity pumps have a capacity from 30l/h up to 300m³/h, and a pressure rating of up to 48bar upon request.	The ‘M’ range of metering pumps have a capacity of up to 50l/h and a pressure rating of up to 18bar.
Torqueflow-Sydex is dedicated to providing the highest quality products and services that constantly meet or exceed customer expectations.

URACA
URACA is one of the leading manufacturers of high-pressure plunger pumps and high-pressure cleaning units.	URACA high pressure and ultra-high pressure plunger pumps are outstanding in their compact design and flexible applications.	URACA has fully automated systems for the hydrodynamic cleaning of individual parts as well as custom-built cleaning systems.

Browse Products and Services