Arjay Engineering Ppm Oil in Water Analyzers, Monitors and Control Instruments
Arjay Engineering produces ppm oil in water analyzers, monitors and control instruments for both industrial and municipal applications. These include the petrochemical industry for upstream and downstream wastewater and oil/water separator monitoring and control in applications such as:
- Produced water
- Storm water
- Oil water knockout treaters
- Bilge water
Ppm oil in water analyzers, monitors and spill and sheen detectors
Arjay Engineering provides ppm oil in water analyzers, oil on water detection and oil/water separator interface and emulsion alarms. For ppm monitoring, UV fluorescence is typically used. The Arjay light scatter approach is perfect for affordable cooling water leak alarms. Interface and oil thickness monitors employ a capacitance technique for reliable low cost monitoring.
For produced water monitoring, theHydroSense 2410 is the model of choice. This analyzer uses UV fluorescence to target the aromatics in the water. Through a simple site calibration, the aromatic response is correlated to a total oil reading in ppm.
Oil/water separator controls and oil spill alarms
The Level-Ease series of capacitance controls are used to monitor and control the oil water interface levels within tanks. The robust probe design does not have optics or moving parts that can foul.
High pressure and a wide temperature range make these an ideal choice for monitoring and control of processes, pumps, and valves.
The Arjay float sensors continuously monitor for oil separated to the surface of water. Simple on/off alarms and oil thickness monitors are used to alert when the accumulation of surface oil requires attention, or to shut down pumps that may inadvertently pump oil to drain.
The Arjay capacitance level controls have a lengthy and reassuring background of reliability. Arjay Engineering offer basic probe mounted transmitters and on/off switches.
The Level-Ease series is available to meet level display requirements, and has a remote control with multiple relay points and proportional outputs.
These can be coupled with any Arjay probe for continuous and point level applications of liquids and solids.
Bilge and ballast water monitoring
Any of the Arjay HydroSense series are suitable for leak alarming. The 2410 is the industrial non-contacting design for untreated or turbid wastewater.
The 3410 and 3420 are the more economical choices and can be used for filtered wastewater or water that is free of suspended solids and turbidity. For bilge and ballast oil content separator applications the 2410 and 3410 carry IMO approval for MEPC.107(49)
Heat transfer systems can contaminate the water with oil through pinhole leaks. The Arjay controls will monitor for these leaks. The HydroSense 2410 and 3410 specifically target petroleum oils where animal or vegetable oils do not want to be alarmed.
The HydroSense 3420 will respond to any free oil type.
There are many approvals and certifications carried by Arjay products. They vary by product but include: ISO 9001:2000, ABS (American Bureau of Shipping), IMO (International Maritime Organization), CSA, UL, CE, CRN, and ABSA.
Certain products can be used in zone 1 and 2, division 1 and 2 hazardous locations through their third party approved explosion proof packaging (Ex d), non-incendive design (Ex n), intrinsic safety barriers (Ex i) or by a purging pressurization option (Ex p and EEx p).
Arjay can provide custom panels and systems to suit your needs. Specialty racks can be designed to accommodate accessories and support instrumentation for your application.
Products and Services
Arjay uses capacitance probes to monitor the gaseous vapour phase of the vessel.
Level Control Solutions
Arjay offers a range of proportional level monitoring solutions and switches for liquid monitoring and interface control applications.
Oil Separation Profiler
Arjay uses capacitance probes to monitor the dielectric of the liquid at multiple points in the tank.
Trace Oil-in-Water Analysers
On offshore production platforms, these are typically found after the final oil / water separation phase and prior to the produced water discharge.
HydroSense 4410-OCM Oil-in-Water Monitor
The cutting-edge Hydrosense 4410-OCM system from Arjay Engineering offers reliable, real-time flow-through parts-per-million (ppm) monitoring of both petroleum and non-petroleum oil in water.
Oil Content Monitoring Solutions for Offshore Applications
Industrial control instrument specialist Arjay Engineering is pleased to launch its latest innovative oil-in-water monitoring solution, the Hydrosense 4410-OCM.
Arjay Product Overview
This white paper contains details of Arjay's products, including oil in water monitors, level controls and oil / water separator monitors.
Designer and manufacturer of level and spill monitoring solutions, Arjay Engineering, is set to exhibit at the Offshore Technology Conference 2019.Read more
Arjay Engineering will have a presence at three industry events in 2012. The company, which produces ppm oil in water analysers, monitors and control instruments for both industrial and municipal applications, will visit conferences in the US, Scotland and the United Arab Emirates.Read more
Arjay Engineering's product overview #AR-OV-09 brochure provides information on a range of instruments, including probe and remote-mounted switches, transmitters and controllers, area leak alarms and instruments for dry pump and phase detection.Read more
Arjay Engineering is pleased to announce it will be exhibiting at the Offshore Technology Conference (OTC). Held annually at Reliant Center in Houston, OTC is the world’s foremost event for the development of offshore resources in the fields of drilling, exploration, production, and enRead more
Arjay Engineering, a supplier of instruments for both industrial and municipal applications, has released a free white paper on the Offshore-Technology website. Arjay Engineering's product overview #AR-OV-09 brochure provides information on a range of instruments, including probe and rRead more
Arjay Engineering designs, manufactures, distributes and sells process and environmental controls and instruments for multiple applications, such as: PPM oil in water monitors Oil in water analyzers Separated oil/water monitors Oil spill monitorRead more