USA Hoist Permanently Installed Explosion-Proof Rack and Pinion Elevators

USA Hoist specializes in vertical transportation equipment for heavy industry. We are able to provide the broadest range of elevator and lifting products for power plants, refineries, offshore platforms and mining, which allows us to customize lifting solutions to your needs and budget.

Rack and pinion, traction and hydraulic elevators for offshore platforms

The Permanently Installed Division provides manufacturing, installation and servicing of rack and pinion, traction and hydraulic elevators for tough industrial environments. These systems can be customized per your plant requirements, including explosion-proofing, corrosion-proofing, and control system integration with plant monitoring. We are able to provide installation in the US and manufactured solutions and technical representatives anywhere in the world.

Permanently installed corrosion-proof elevators

USA Hoist’s permanently installed corrosion-proof elevators are designed for use on:

  • Absorbers
  • Accumulator tanks
  • Boilers
  • Chimneys
  • Coal-handling facilities
  • Control facilities
  • Cooling towers
  • Crushers
  • Factories
  • Heat recovery steam generators
  • Launch complexes
  • Mines
  • Nuclear reactors
  • Offices
  • Precipitators
  • Selective catalytic reduction systems
  • Scrubbers
  • Silos
  • Solar towers
  • Water dam shafts
  • Wind turbines

Rack and pinion elevators for the offshore industry

Rack and pinion elevators are the type most often used in heavy industry. They are exceptionally well-suited to harsh environmental conditions and offer a few specific advantages over traction or hydraulic elevators. These include the following:

  • They generally do not require the additional cost of a separate machine room and hoistway
  • Almost all of the loading is directly into the ground or structural base
  • They can be easily installed inside or outside on new or existing structures and can be easily adapted to inclined and curved surfaces
  • In case of power failure, the elevator can be brought down to a safe landing in a controlled descent via gravity (hydraulic elevators also enjoy this advantage)

Our standard rack and pinion models range from 1,000lb to 6,000lb capacities and run at speeds up to 350ft per minute. We can provide custom rack and pinion elevators ranging from 400lb to 10,000lb capacity.

Traction and hydraulic-driven elevators

Traction and hydraulic-driven elevators are far more common than rack and pinion elevators outside the heavy industry and are occasionally a better solution. They offer significantly greater flexibility in speed and capacity and can be designed to withstand difficult industrial environments.

USA Hoist and its sister company Mid-American Elevator have extensive experience satisfying extremely custom lifting requirements. We have installed high-speed, explosion-proof, corrosion-proof traction elevators for use by departing astronauts on the shuttle launch pads at the Kennedy Space Center and 500,000lb hydraulic lifting solutions for Underwriters Laboratories.

Alimak elevator rehabilitation

Not only can we provide new equipment for installation and replacement, but USA Hoist has considerable experience rehabilitating aging equipment, improving cost-effectiveness through increasing the life of the elevator. Capabilities include rehabilitation of other suppliers’ products, including Alimak and Champion.

Rental construction hoist and mast climbing work platforms

The Rental Division maintains a modern fleet of over 100 construction hoists and 50 mast climbing work platforms, and can install and service equipment anywhere in the continental US. Our construction hoists can be used during plant outages, additions, and upgrades to facilitate more cost-effective movement of men and materials. Our mast climbing work platforms are ideal for tower demolition and repair.

Augmenting access to your plant with USA Hoist construction hoists and mast climbing work platforms can dramatically increase productivity during additions, upgrades, planned outages and routine maintenance by providing safe, fast access for personnel and materials.

Industrial elevator preventative maintenance programs

USA Hoist provides preventative maintenance and call-back service throughout the mid-west and north-east US and has close relationships with other experienced elevator contractors in the rest of the country who are able to provide the same high standard of service.

Make an enquiry

Follow this company

Follow the company to be always up to date with this company

Press Release

USA Hoist Releases White Paper on Permanent Rack and Pinion Elevators

USA Hoist, a provider of vertical transportation equipment for heavy industry, has released a free white paper on the Offshore-Technology website.

White Papers

Permanent Rack and Pinion Elevators

USA Hoist elevators are designed from top to bottom with consideration for the safety of our passengers and mechanics at the forefront.

Address
USA Hoist

Mid-American Elevator Co., Inc.

820 N. Wolcott Ave.

Chicago, IL 60622

Other

United States of America

+1 773 486 6900 +1 773 486 2438 www.mid-americanelevator.com www.usahoist.com

USA Hoist Images

Products and Services

Video

Related Projects



Press Release

15 March 2012

USA Hoist, a provider of vertical transportation equipment for heavy industry, has released a free white paper on the Offshore-Technology website.

Read more

Regional Offices

USA Hoist

Mid-American Elevator Co., Inc.

820 N. Wolcott Ave.

Chicago, IL 60622

Other

United States of America

M. Cullen Bailey +1 773 486 6900 +1 773 486 2438 www.mid-americanelevator.com www.usahoist.com

Contact company

I have read and accept the terms and conditions and privacy policys.
We'd like to keep you informed about relevant promotions, products and services, if you would like not to receive these, check this box.
If you would like to hear from carefully selected third party companies, check this box
Follow this company to receive notifications when they update.


Go Top