Glas Mesh Company

Subscribed

You have successfully submitted your enquiry. Someone from our company will respond ASAP

Fiberglass Reinforced Plastic (FRP) Shields and Saddles

Address
PO Box 1718,
West Chester,
PA 19380,
Other,
United States of America
Phone
Fax Number
Share

Glas Mesh Company manufactures and fabricates fiberglass reinforced plastic (FRP) shields, saddles, spacers and half rounds used to prevent and/or correct pipeline metal-to-metal contact shorts and crevice corrosion.

FRP shields, saddles and FRP half rounds

FRP shields, saddles and FRP half rounds are commonly used to electrically isolate pipe supported above grade. FRP plastics are ideal for all types of pipe to support point-loading applications because they a high compressive strength, will not become brittle in cold temperatures, and do not soften or distort from heat. Our FRP materials are used for maintenance and new construction.

Non-conductive pipe rollers

Our affiliated company LB&A, manufactures both long and short pattern non-conductive pipe rollers, primarily used to provide a non-abrasive, electrically isolating alternative to metal rollers. The polyurethane-based non-conductive rollers are formulated for long-term atmospheric durability and are a used as a direct replacement for cast iron rollers.

FRP saddles for electrical isolation of pipelines

FRP Type# 240 shields and Type# 180 saddles are a pre-shaped method of electrical isolation for suspended pipelines. They are also a means of abrasion control on coated pipes and are generally adaptable to any hanger or support. The shields and saddles are highly pigmented for long-term UV resistance.

FRP solid half rounds used to eliminate pipe-to-support contact and control crevice corrosion.
4H non-conductive pipe rollers and FRP Type# 180 saddles protecting a 50mil factory applied coating.
A non-abrasive non-conductive roller installed with a painted gas main.
Painted steel pipe with petrolatum tape and FRP Type# 180 saddles used to prevent crevice corrosion.
Coated U-bolts with FRP flat stock isolating product pipe on vertical support.

FRP spacers and half rounds for pipelines

FRP Type# 120 and Type# 60 spacers are a pre-shaped method of preventing and/or correcting the common problem of exposed steel pipe crevice corrosion. They are positioned between the pipe and its support. A special epoxy adhesive secures the FRP spacer to the pipe and seals the steel substrate from the atmosphere.

FRP half rounds are used with or without coated U-bolts and are designed to eliminate pipe to support contact and manage crevice corrosion.

Non-conductive rollers, FRP shields and saddles

Non-conductive rollers are typically used with FRP shields and saddles when the pipe has a thick barrier coating. On painted or thin barrier coatings the non-conductive rollers are installed as a means to isolate the pipe from the support or hanger and to serve as a method of coating abrasion control. In exposed environments the non-conductive rollers will not bind or corrode to the axles and stop rolling as do the cast metal rollers.

White Papers

  • FRP Corrosion Control, Insulating and Anti-Wear Products

    Having been a fiberglass reinforced plastic (FRP) manufacturer and fabricator since 1965, Glas Mesh Company set as objectives the development and marketing of several new and standardised FRP products for use by industry corrosion control engineers and technicians, and insulating products suitable for the prevention of electrical contact shorts on buried and exposed pipelines or mains.

Press Releases

  • Glas Mesh Company Releases Free White Paper

    Glas Mesh Company, a manufacturer and fabricator of fiberglass reinforced plastic (FRP) shields, saddles, spacers and half rounds, has released a free white paper on the Offshore-Technology website.

Address
PO Box 1718
West Chester
PA 19380
Other
United States of America

Email address
Phone
Fax Number