![](https://www.offshore-technology.com/wp-content/themes/goodlife-wp-B2B/images/WhitePaper_Default_icon.png)
Assembly and Maintenance Procedure for Bondura 6.1
By Bolt NorgeThe Bondura bolt is type-approval certificated by DNV and follows guidelines by API specifications 8c, DNV rules for lifting appliances, FEM rules for heavy lifting appliances, NS 5514 crane standard.
Assembly Procedure
Preparations:
Remove any burr. Clean the support.
Align the bolt hole. The middle section must line up with the support on each side. Use a jack or hoist if necessary. If the bolt is hammered into a hole where the bearing and the support does not line up, the bolt may be damaged.
For the full assembly procedure, please download this free white paper.
![](https://www.offshore-technology.com/wp-content/themes/goodlife-wp-B2B/images/WhitePaper_Default_icon.png)