Skip to site menu Skip to page content

Subsea 3D Model of Damaged Wellhead

By Welaptega Marine

During installation, a wellhead was impacted by a blow-out preventer (BOP), resulting in inward bending of the inner tree hub, deformation and smearing of material at the top and outer BOP mating surfaces of the outer hub, and wedging of the gasket between the inner and outer hubs. The client required the geometry of the wellhead to facilitate removal and replacement of the damaged gasket.

Welaptega constructed two 3D models to provide the geometry of the wellhead prior to, and following the removal of the gasket. A marker and two magnets were placed on the wellhead during photography to provide scaling references.

Download this free white paper for more information.

Enter your details below to view the free white paper

By downloading this whitepaper, you acknowledge that GlobalData may share your information with our white paper partners/sponsors who may contact you directly with information on their products and services.

Visit our Privacy Policy for more information about our services, how GlobalData may use, process and share your personal data, including information on your rights in respect of your personal data and how you can unsubscribe from future marketing communications. Our services are intended for corporate subscribers and you warrant that the email address submitted is your corporate email address.

Related Content